Chemicals Store/AlumaRestore
TS-602 Master Code100% GB-CLP Verified
TS-602UK Stock Ready for Despatch
AlumaRestore Aluminium Acid Brightener
Standard Dilution1:50 to 1:100
Heated Reaction50°C–90°C Optimized
Substrate SafetyPaint & Alloy Safe
Professional Aluminium Brightener

AlumaRestore Aluminium Acid Brightener

Removes milky oxidation, diesel scorch, and restores natural metal lustre.

Select Pack Format:SKU: ALK-CHM-TS602-20L
Trade Price
£112.00ex VAT
1
Formulation

BRING RAW ALUMINIUM BACK TO LIFE.

Standard detergents rely on superficial foam. Alkota master chemistry attacks the static bond holding road film, grease, and exhaust soot to paint and metal.

When high-pressure water alone hits road film or engine grease, it shears off the loose top layer while leaving behind a dull static film.

AlumaRestore Aluminium Acid Brightener is built around the original TS-602 formula. Developed alongside industrial pressure washers, it uses heat-stable surfactants that break down grease and suspend dirt in the rinse stream before it can re-settle.

Hot Water SynergyAccelerates from 50°C to 90°C without evaporating active agents.
Coil SafeNon-crystallising formula protects heating coils and pump seals.
UK CompliantFully registered with verified UK Safety Data Sheets.

Surface Action

1. Penetrates the Film

Lowers water surface tension to get beneath road dirt and traffic grime.

2. Breaks Down Oils

Turns heavy petroleum oils and diesel exhaust soot into water-soluble emulsion.

3. Clean Rinse

Holds dirt suspended so it washes away completely without streaking.

Target Soils

The dirt it dissolves.

Formulated specifically to dissolve stubborn environmental residues, baked soot, and oily binders that resist ordinary wash soap.

01

ALUMINIUM OXIDATION

02

DIESEL EXHAUST SCORCH

03

SCALE CORROSION

04

BRAKE DUST

Application Protocol

Three steps to a clean surface.

Follow this application sequence to maximise chemical cleaning efficiency and prevent waste.

STEP 01

Dilute & Meter

Heavy Oxidation: 1:10. Maintenance Brightening: 1:20 to 1:30.

Set downstream injector or foam lance metering valve to match water hardness and soil density.

STEP 02

Apply & Dwell

Pre-wet surface

Apply evenly from bottom to top to prevent run lines. Allow 2–3 minutes contact dwell without letting it dry.

STEP 03

High-Pressure Rinse

150–200 Bar pressure rinse with 50°C–65°C hot water

Rinse thoroughly from top to bottom. Surfaces will sheet freely with zero chalky detergent residue.

Safety:Danger: Contains acidic compounds. Causes severe skin burns and eye damage. Always wear face visor, acid-resistant gloves and apron.
SDS PDF →
Technical Specification

Substrate & Safety Dossier.

Verified surface interactions under standard operating dilution, formulation profile, and downloadable GB-CLP documentation.

Substrate Compatibility Matrix

Raw / Mill-Finish AluminiumProduces uniform satin luster
recommended
Stainless Steel
recommended
Polished / Anodised AluminiumMay dull mirror polish
test first
GlassCan etch glass
do not use
Formulation Reference
Master Code:TS-602
Original Name:Aluma Shine 2
Family:AlumaRestore
Compliance:100% GB-CLP Verified
Induction:High/Low Pressure Injector
Safety Documentation

Safety Data Sheet (SDS)

Official UK CLP safety dossier for TS-602 covering active composition, PPE requirements, first aid protocols, and storage.

Master Formula TS-602 (Aluma Shine 2)
Sourced, Stocked & Despatched from Alkota UK