Chemicals Store/RoadForce
TR-407 Master Code100% GB-CLP Verified
TR-407UK Stock Ready for Despatch
RoadForce Auto Touchless Wash
Standard Dilution1:50 to 1:100
Heated Reaction50°C–90°C Optimized
Substrate SafetyPaint & Alloy Safe
Commercial Formulation

RoadForce Auto Touchless Wash

Touchless vehicle wash formulated for light commercials, company vans, and dealership valeting.

Select Pack Format:SKU: ALK-CHM-TR407A-20L
Trade Price
£78.00ex VAT
1
Formulation

Clean deeper. In less time.

Standard detergents rely on superficial foam. Alkota master chemistry attacks the static bond holding road film, grease, and exhaust soot to paint and metal.

When high-pressure water alone hits road film or engine grease, it shears off the loose top layer while leaving behind a dull static film.

RoadForce Auto Touchless Wash is built around the original TR-407 formula. Developed alongside industrial pressure washers, it uses heat-stable surfactants that break down grease and suspend dirt in the rinse stream before it can re-settle.

Hot Water SynergyAccelerates from 50°C to 90°C without evaporating active agents.
Coil SafeNon-crystallising formula protects heating coils and pump seals.
UK CompliantFully registered with verified UK Safety Data Sheets.

Surface Action

1. Penetrates the Film

Lowers water surface tension to get beneath road dirt and traffic grime.

2. Breaks Down Oils

Turns heavy petroleum oils and diesel exhaust soot into water-soluble emulsion.

3. Clean Rinse

Holds dirt suspended so it washes away completely without streaking.

Target Soils

The dirt it dissolves.

Formulated specifically to dissolve stubborn environmental residues, baked soot, and oily binders that resist ordinary wash soap.

01

Road film & diesel exhaust soot

02

Heavy machinery grease & hydraulic oil

03

Winter road salt & de-icer chlorides

04

Atmospheric soot & industrial fallout

05

Baked brake dust & transmission fluids

Application Protocol

Three steps to a clean surface.

Follow this application sequence to maximise chemical cleaning efficiency and prevent waste.

STEP 01

Dilute & Meter

Hot/Cold Wash: 1:60 to 1:100. Foam Lance: 1:12.

Set downstream injector or foam lance metering valve to match water hardness and soil density.

STEP 02

Apply & Dwell

Induct through pressure washer at 1:80

Apply evenly from bottom to top to prevent run lines. Allow 2–3 minutes contact dwell without letting it dry.

STEP 03

High-Pressure Rinse

150–200 Bar pressure rinse with 50°C–65°C hot water

Rinse thoroughly from top to bottom. Surfaces will sheet freely with zero chalky detergent residue.

Safety:Avoid contact with eyes. Rinse thoroughly with clean water.
SDS PDF →
Technical Specification

Substrate & Safety Dossier.

Verified surface interactions under standard operating dilution, formulation profile, and downloadable GB-CLP documentation.

Substrate Compatibility Matrix

Vehicle Paint & Clearcoat
recommended
Plastics & Trim
recommended
Glass
recommended
Formulation Reference
Master Code:TR-407
Original Name:Power Blast
Family:RoadForce
Compliance:100% GB-CLP Verified
Induction:High/Low Pressure Injector
Safety Documentation

Safety Data Sheet (SDS)

Official UK CLP safety dossier for TR-407 covering active composition, PPE requirements, first aid protocols, and storage.

Complementary Formulations

Pair with matching chemistry.

Full Chemical Range
RoadForce Fleet Heavy TFR
RoadForce Series

RoadForce Fleet Heavy TFR

Alkota formula: TR-407 (Power Blast)
From (5 L Canister) · Ex VAT£28.50
Master Formula TR-407 (Power Blast)
Sourced, Stocked & Despatched from Alkota UK