Chemicals Store/RoadForce
TR-407 Master Code100% GB-CLP Verified
TR-407UK Stock Ready for Despatch
RoadForce Fleet Heavy TFR
Standard Dilution1:50 to 1:100
Heated Reaction50°C–90°C Optimized
Substrate SafetyPaint & Alloy Safe
Professional Vehicle Cleaner

RoadForce Fleet Heavy TFR

Built for the dirt ordinary detergents leave behind.

Select Pack Format:SKU: ALK-CHM-TR407-20L
Trade Price
£84.00ex VAT
1
Formulation

THIS ISN'T JUST SOAP.

Standard detergents rely on superficial foam. Alkota master chemistry attacks the static bond holding road film, grease, and exhaust soot to paint and metal.

When high-pressure water alone hits road film or engine grease, it shears off the loose top layer while leaving behind a dull static film.

RoadForce Fleet Heavy TFR is built around the original TR-407 formula. Developed alongside industrial pressure washers, it uses heat-stable surfactants that break down grease and suspend dirt in the rinse stream before it can re-settle.

Hot Water SynergyAccelerates from 50°C to 90°C without evaporating active agents.
Coil SafeNon-crystallising formula protects heating coils and pump seals.
UK CompliantFully registered with verified UK Safety Data Sheets.

Surface Action

1. Penetrates the Film

Lowers water surface tension to get beneath road dirt and traffic grime.

2. Breaks Down Oils

Turns heavy petroleum oils and diesel exhaust soot into water-soluble emulsion.

3. Clean Rinse

Holds dirt suspended so it washes away completely without streaking.

Target Soils

The dirt it dissolves.

Formulated specifically to dissolve stubborn environmental residues, baked soot, and oily binders that resist ordinary wash soap.

01

ROAD FILM

02

DIESEL RESIDUE

03

OIL & GREASE

04

WINTER SALT

05

INDUSTRIAL GRIME

Application Protocol

Three steps to a clean surface.

Follow this application sequence to maximise chemical cleaning efficiency and prevent waste.

STEP 01

Dilute & Meter

Hot Wash: 1:50 to 1:120 (approx 1-2% at nozzle). Cold Wash: 1:30 to 1:60. Foam Cannon: 1:10.

Set downstream injector or foam lance metering valve to match water hardness and soil density.

STEP 02

Apply & Dwell

Apply via high pressure chemical injector or low-pressure foam cannon from bottom to top

Apply evenly from bottom to top to prevent run lines. Allow 2–3 minutes contact dwell without letting it dry.

STEP 03

High-Pressure Rinse

150–200 Bar pressure rinse with 50°C–65°C hot water

Rinse thoroughly from top to bottom. Surfaces will sheet freely with zero chalky detergent residue.

Safety:Causes serious eye irritation. Wear protective gloves and eye protection. Do not allow chemical to dry on hot paint surfaces.
SDS PDF →
Technical Specification

Substrate & Safety Dossier.

Verified surface interactions under standard operating dilution, formulation profile, and downloadable GB-CLP documentation.

Substrate Compatibility Matrix

Vehicle Paint & ClearcoatExcellent glossy finish
recommended
Raw / Mill-Finish AluminiumDo not allow concentrate to dry
safe
Plastics, Vinyl & DecalsLivery-safe formulation
recommended
Glass & GlazingFree-rinsing without streaking
safe
Formulation Reference
Master Code:TR-407
Original Name:Power Blast
Family:RoadForce
Compliance:100% GB-CLP Verified
Induction:High/Low Pressure Injector
Safety Documentation

Safety Data Sheet (SDS)

Official UK CLP safety dossier for TR-407 covering active composition, PPE requirements, first aid protocols, and storage.

Complementary Formulations

Pair with matching chemistry.

Full Chemical Range
RoadForce Auto Touchless Wash
RoadForce Series

RoadForce Auto Touchless Wash

Alkota formula: TR-407 (Power Blast)
From (5 L Canister) · Ex VAT£26.50
Master Formula TR-407 (Power Blast)
Sourced, Stocked & Despatched from Alkota UK